National Textile University CGPA Calculator

Faisalabad, Punjab · public · est. 1959

CGPA at National Textile University is total quality points divided by total credit hours, counted across every semester you have completed, a quality point being one credit hour multiplied by that course's grade point. National Textile University awards those grade points through the official National Textile University grading scale shown below, a 12-band table that runs from 4.00 (A+, 90% and above) down to 0.00 for a fail, giving a maximum CGPA of 4.00. The lowest passing grade is D, awarded from 50%.

National Textile UniversityChange university

Add one row per course this semester.

Course
Credit hrs
Marks / 100
–
Course
Credit hrs
Marks / 100
–
Course
Credit hrs
Marks / 100
–

Semester GPA (SGPA)

–

out of 4.00

Percentage: –
Credit hours: 0.00

Switch to “Enter marks” to see your exact percentage. It cannot be derived from letter grades alone, and Pakistan has no single official CGPA-to-percentage formula.

Build a full transcript

National Textile University grading scale

National Textile University grades on an absolute scale out of 4.00 with 12 bands. A mark of 90% or above earns A+ (4.00), and 50% is the lowest passing band (D). The calculator above already applies these bands, so you can enter raw marks instead of letters.

National Textile University grading scale: marks, grade and grade point
Marks (%)	Grade	Grade point
90–100	A+	4.00
85–89	A	4.00
80–84	A-	3.66
75–79	B+	3.33
71–74	B	3.00
68–70	B-	2.66
64–67	C+	2.33
61–63	C	2.00
58–60	C-	1.66
54–57	D+	1.33
50–53	D	1.00
0–49	F	0.00

All sources (1)

http://ntu.edu.pk/rules-regulations.php · retrieved 2026-08-31Official absolute-grading table with a separate A+ (90-100%) tier above A (85-89.9%), both worth 4.00 grade points; otherwise matches the common HEC-style 11-letter scale used by several other universities in this dataset. Minimum CGPA for good standing is 2.0/4.0. W (withdrawn) and I (incomplete) carry no grade-point equivalency and are excluded from credit-hour totals. Students with D/D+ grades may repeat courses; the new grade replaces the old one in CGPA calculations.

How grading works at National Textile University

A Pakistani semester result is built one course at a time: the grade earned translates into a point value, that value is weighted against the credit hours the course carries, the weighted figures for the term are added up and divided back by the same credit-hour total, and doing this again every semester produces the running CGPA. National Textile University in Faisalabad follows this exact process, with 4.0 marking the top of the scale shared by most HEC-aligned universities.

National Textile University traces back to 1959 as the College of Textile Technology, long before it became a full university, and its home city of Faisalabad, often called the textile hub of Pakistan, explains why textile engineering and textile technology remain its signature degrees even as it has added business and computer science programmes. Few other Pakistani universities can claim as direct an institutional link to the industry their flagship degree serves as NTU does.

This page turned up no NTU-issued grading document, so it applies the general HEC-aligned shape most Pakistani public universities follow, a 4.0 ceiling, a pass mark generally in the fifties, rather than a table confirmed as NTU's own. Textile engineering students in particular should keep in mind that laboratory and mill-practice work often carries separate assessment weight from theory papers, so the letter grade on a result card may reflect a blend this general scale can't fully capture, your own department's breakdown is the document that actually matters.

Worked example: a full semester on the National Textile University scale

Here is a complete 15 credit-hour semester scored against the National Textile University grade points in the table above. The marks are illustrative, but every number after them is calculated the same way the calculator on this page calculates yours.

Illustrative National Textile University semester showing marks, grades, credit hours and quality points
Course	Credit hrs	Marks /100	Grade	Grade point	Quality points
Core course I	3	95	A+	4.00	3 × 4.00 = 12.00
Core course II	4	82	A-	3.66	4 × 3.66 = 14.64
Core course III	3	73	B	3.00	3 × 3.00 = 9.00
Elective	3	66	C+	2.33	3 × 2.33 = 6.99
Lab / practical	2	59	C-	1.66	2 × 1.66 = 3.32
Total	15				45.95

Step by step

Convert each course mark to a grade point. Work out each course as a percentage of its total marks, then read the letter off the National Textile University grading table. 95 out of 100 is 95%, which falls in the A+ band and is worth 4.00 grade points.
Multiply each grade point by the course credit hours. Credit hours decide how much each course counts, so multiply to get quality points: 3 × 4.00 = 12.00, 4 × 3.66 = 14.64, 3 × 3.00 = 9.00, 3 × 2.33 = 6.99, 2 × 1.66 = 3.32.
Add the quality points and the credit hours. Adding the five courses gives 45.95 quality points across 15 credit hours.
Divide to get the semester GPA. 45.95 ÷ 15 = 3.06, the semester GPA for this term at National Textile University.
Fold the semester into your CGPA. If you had already completed 45 credit hours at a CGPA of 3.20, those carry 144.00 quality points. Add this semester and the CGPA becomes (144.00 + 45.95) ÷ (45 + 15) = 3.17.

Notice how the 4-credit course moves the average roughly twice as hard as the 2-credit lab. That credit-hour weighting is the whole reason a GPA is not just the average of your grade points.

Which National Textile University programmes use this scale?

The same grading plan applies across National Textile University’s degree programmes, including BS Textile Engineering, BS Textile Technology, BS Textile Design and BBA. Credit-hour loads differ by programme (a typical semester runs 15 to 18 credit hours), but the marks-to-grade-point mapping above does not change between them.

National Textile University CGPA: frequently asked questions

What CGPA keeps an NTU student off probation or clears them to graduate?

No confirmed NTU-wide CGPA floor for probation or graduation surfaced while researching this page, so the roughly 2.0 figure common across HEC-aligned universities is the fallback until your department's written policy says otherwise. Engineering degrees such as Textile Engineering sometimes carry a slightly higher internal bar because of accreditation requirements, so it's worth confirming the exact number with your faculty.

What counts as a good CGPA at NTU?

Lacking a confirmed NTU-specific honours chart, the general convention used across most HEC-aligned universities is a fair guide: past roughly 3.5 counts as outstanding, 3.0 to 3.5 as solidly good, and comfortably above 2.0 as a safe pass. Merit scholarships and gold-medal recognition at public universities like NTU commonly reference similar bands, though the exact cut-off is set internally.

Does NTU use a different grading scale from the HEC standard?

No grading table published specifically by NTU turned up during research for this page, so the bands shown follow the standard HEC-aligned shape most Pakistani universities use, four grade points at the top, a pass mark generally in the fifties, steps down from there. If your department issues its own table, especially one accounting for lab and mill-practice marks in textile courses, that document takes precedence.

What happens to an F, a withdrawal or an incomplete at NTU?

An F at NTU, in line with most Pakistani universities, earns no grade points and lowers the CGPA until the course is repeated and passed, usually a requirement before a degree is confirmed. A withdrawal taken before the deadline is typically excluded from the GPA rather than treated as a failure, and an incomplete acts as a temporary marker for outstanding lab work or a delayed assessment.

How is SGPA different from CGPA at NTU?

SGPA only reflects the courses completed in a single semester, so a term heavy with textile laboratory work can move it differently than a theory-focused term would, while CGPA averages every semester finished so far, weighted by credit hours, and shifts more gradually. Because CGPA is the figure printed on a final transcript, it carries more weight with employers in Faisalabad's textile industry than any one term's SGPA.

How many credit hours does a typical semester carry at NTU?

A typical semester on NTU's Textile Engineering or Technology track runs somewhere around seventeen to twenty credit hours once laboratory and mill-practice sessions are counted, a touch heavier than a standard business or computer science semester because of the extra practical component. Since GPA weights by credit hours rather than time spent, a lab-heavy term doesn't always move the average as much as its workload might suggest.

Need every semester on one page?

The transcript generator turns your National Textile University semesters into a full result card, complete with per-term SGPA, running CGPA, percentage and a grand-total row, and downloads it as a PDF you can attach to an application.

Build a National Textile University transcript

CalcScholar is not affiliated with or endorsed by National Textile University. The National Textile University name and logo are used only to identify whose grading scale this calculator applies, and any result produced here is unofficial. Your transcript from the National Textile University examination department is the authority.